#+TITLE: Emacs configuration file #+AUTHOR: Lars Tveito #+BABEL: :cache yes #+LATEX_HEADER: \usepackage{parskip} #+LATEX_HEADER: \usepackage{inconsolata} #+LATEX_HEADER: \usepackage[utf8]{inputenc} #+PROPERTY: header-args :tangle yes * About This is an Emacs configuration file written in [[http://orgmode.org][Org mode]]. It is an attempt to keep my =~/.emacs.d= tidy, but still be able to keep it all in one file. I aim to briefly explain all my configurations as I go along! I would not recommend using this configuration /as-is/, because it probably contains a lot you don't really need. I do, however, hope people find some golden nuggets that they can smuggle into their own configs. If you really do want to try this config out, this is how I'd go about it: Clone the repo. #+BEGIN_SRC sh :tangle no git clone https://github.com/larstvei/dot-emacs #+END_SRC Backup your old =~/.emacs.d= (if necessary). #+BEGIN_SRC sh :tangle no mv ~/.emacs.d ~/.emacs.d-bak #+END_SRC Backup your old =~/.emacs=-file (if necessary). #+BEGIN_SRC sh :tangle no mv ~/.emacs ~/.emacs-bak #+END_SRC And finally #+BEGIN_SRC sh :tangle no mv dot-emacs ~/.emacs.d #+END_SRC On first run it should install a bunch of packages (this might take a while), and you might have to restart your Emacs the first time. If you experience bugs, please let me know! * Configurations ** Meta All changes to the configuration should be done in =init.org=, *not* in =init.el=. Any changes in the =init.el= will be overwritten by saving =init.org=. The =init.el= in this repo should not be tracked by git, and is replaced the first time Emacs is started (assuming it has been renamed to =~/.emacs.d=). Emacs can't load =.org=-files directly, but =org-mode= provides functions to extract the code blocks and write them to a file. There are multiple ways of handling this; like suggested by [[http://emacs.stackexchange.com/questions/3143/can-i-use-org-mode-to-structure-my-emacs-or-other-el-configuration-file][this StackOverflow post]], one could just use =org-babel-load-file=, but I had problems with byte-compilation. Previously I tracked both the =org.=- and =el.=-files, but the git commits got a little messy. So here is a new approach. When this configuration is loaded for the first time, the ~init.el~ is the file that is loaded. It looks like this: #+BEGIN_SRC emacs-lisp :tangle no ;; This file replaces itself with the actual configuration at first run. ;; We can't tangle without org! (require 'org) ;; Open the configuration (find-file (concat user-emacs-directory "init.org")) ;; tangle it (org-babel-tangle) ;; load it (load-file (concat user-emacs-directory "init.el")) ;; finally byte-compile it (byte-compile-file (concat user-emacs-directory "init.el")) #+END_SRC It tangles the org-file, so that this file is overwritten with the actual configuration. There is no reason to track the =init.el= that is generated; by running the following command =git= will not bother tracking it: #+BEGIN_SRC sh :tangle no git update-index --assume-unchanged init.el #+END_SRC If one wishes to make changes to the repo-version of =init.el= start tracking again with: #+BEGIN_SRC sh :tangle no git update-index --no-assume-unchanged init.el #+END_SRC The =init.el= should (after the first run) mirror the source blocks in the =init.org=. We can use =C-c C-v t= to run =org-babel-tangle=, which extracts the code blocks from the current file into a source-specific file (in this case a =.el=-file). To avoid doing this each time a change is made we can add a function to the =after-save-hook= ensuring to always tangle and byte-compile the =org=-document after changes. #+BEGIN_SRC emacs-lisp (defun tangle-init () "If the current buffer is 'init.org' the code-blocks are tangled, and the tangled file is compiled." (when (equal (buffer-file-name) (expand-file-name (concat user-emacs-directory "init.org"))) ;; Avoid running hooks when tangling. (let ((prog-mode-hook nil)) (org-babel-tangle) (byte-compile-file (concat user-emacs-directory "init.el"))))) (add-hook 'after-save-hook 'tangle-init) #+END_SRC I'd like to keep a few settings private, so we load a =private.el= if it exists after the init-file has loaded. #+BEGIN_SRC emacs-lisp (add-hook 'after-init-hook (lambda () (let ((private-file (concat user-emacs-directory "private.el"))) (when (file-exists-p private-file) (load-file private-file))))) #+END_SRC ** Packages Managing extensions for Emacs is simplified using =package= which is built in to Emacs 24 and newer. To load downloaded packages we need to initialize =package=. =cl= is a library that contains many functions from Common Lisp, and comes in handy quite often, so we want to make sure it's loaded, along with =package=, which is obviously needed. #+BEGIN_SRC emacs-lisp (require 'cl) (require 'package) (package-initialize) #+END_SRC Packages can be fetched from different mirrors, [[http://melpa.milkbox.net/#/][melpa]] is the largest archive and is well maintained. #+BEGIN_SRC emacs-lisp (setq package-archives '(("gnu" . "http://elpa.gnu.org/packages/") ("org" . "http://orgmode.org/elpa/") ("melpa" . "https://melpa.org/packages/") ("melpa-stable" . "https://stable.melpa.org/packages/"))) (add-to-list 'package-pinned-packages '(cider . "melpa-stable") t) #+END_SRC The configuration assumes that the packages listed below are installed. To ensure we install missing packages if they are missing. #+BEGIN_SRC emacs-lisp (let* ((packages '(auto-compile ; automatically compile Emacs Lisp libraries cider ; Clojure Interactive Development Environment company ; Modular text completion framework define-word ; display the definition of word at point diminish ; Diminished modes from modeline drag-stuff ; Drag stuff around in Emacs expand-region ; Increase selected region by semantic units focus ; Dim color of text in surrounding sections idle-require ; load elisp libraries while Emacs is idle geiser ; GNU Emacs and Scheme talk to each other git-gutter-fringe ; Fringe version of git-gutter.el golden-ratio ; Automatic resizing windows to golden ratio haskell-mode ; A Haskell editing mode helm ; Incremental and narrowing framework helm-company ; Helm interface for company-mode helm-projectile ; Helm integration for Projectile helm-swoop ; Efficiently hopping squeezed lines jedi ; Python auto-completion for Emacs js2-mode ; Improved JavaScript editing mode magit ; control Git from Emacs markdown-mode ; Emacs Major mode for Markdown-formatted files matlab-mode ; MATLAB integration with Emacs maude-mode ; Emacs mode for the programming language Maude monokai-theme ; A fruity color theme for Emacs move-text ; Move current line or region with M-up or M-down multiple-cursors ; Multiple cursors for Emacs. olivetti ; Minor mode for a nice writing environment org ; Outline-based notes management and organizer paredit ; minor mode for editing parentheses pdf-tools ; Emacs support library for PDF files. projectile ; Manage and navigate projects in Emacs easily slime ; Superior Lisp Interaction Mode for Emacs try)) ; Try out Emacs packages ;; Remove all packages already installed (packages (remove-if 'package-installed-p packages))) (when packages (ignore-errors (package-refresh-contents) (mapcar 'package-install packages) ;; This package is only relevant for Mac OS X. (when (memq window-system '(mac ns)) (package-install 'exec-path-from-shell))))) #+END_SRC ** Mac OS X I run this configuration mostly on Mac OS X, so we need a couple of settings to make things work smoothly. In the package section =exec-path-from-shell= is included (only if you're running OS X), this is to include environment-variables from the shell. It makes using Emacs along with external processes a lot simpler. I also prefer using the =Command=-key as the =Meta=-key. #+BEGIN_SRC emacs-lisp (when (memq window-system '(mac ns)) (setq ns-pop-up-frames nil mac-option-modifier nil mac-command-modifier 'meta x-select-enable-clipboard t) (exec-path-from-shell-initialize)) #+END_SRC ** Require Some features are not loaded by default to minimize initialization time, so they have to be required (or loaded, if you will). =require=-calls tends to lead to the largest bottleneck's in a configuration. =idle-require= delays the =require=-calls to a time where Emacs is in idle. So this is great for stuff you eventually want to load, but is not a high priority. #+BEGIN_SRC emacs-lisp (require 'idle-require) ; Need in order to use idle-require (dolist (feature '(auto-compile ; auto-compile .el files jedi ; auto-completion for python matlab ; matlab-mode ob-matlab ; org-babel matlab ox-latex ; the latex-exporter (from org) ox-md ; Markdown exporter (from org) recentf ; recently opened files tex-mode)) ; TeX, LaTeX, and SliTeX mode commands (idle-require feature)) (setq idle-require-idle-delay 5) (idle-require-mode 1) #+END_SRC ** Sane defaults These are what /I/ consider to be saner defaults. We can set variables to whatever value we'd like using =setq=. #+BEGIN_SRC emacs-lisp (setq auto-revert-interval 1 ; Refresh buffers fast default-input-method "TeX" ; Use TeX when toggling input method. doc-view-continuous t ; At page edge goto next/previous. echo-keystrokes 0.1 ; Show keystrokes asap. inhibit-startup-message t ; No splash screen please. initial-scratch-message nil ; Clean scratch buffer. ring-bell-function 'ignore ; Quiet. sentence-end-double-space nil); No double space ;; Some mac-bindings interfere with Emacs bindings. (when (boundp 'mac-pass-command-to-system) (setq mac-pass-command-to-system nil)) #+END_SRC Some variables are buffer-local, so changing them using =setq= will only change them in a single buffer. Using =setq-default= we change the buffer-local variable's default value. #+BEGIN_SRC emacs-lisp (setq-default fill-column 79 ; Maximum line width truncate-lines t ; Don't fold lines indent-tabs-mode nil ; Use spaces instead of tabs split-width-threshold 100 ; Split verticly by default auto-fill-function 'do-auto-fill) ; Auto-fill-mode everywhere #+END_SRC The =load-path= specifies where Emacs should look for =.el=-files (or Emacs lisp files). I have a directory called =site-lisp= where I keep all extensions that have been installed manually (these are mostly my own projects). #+BEGIN_SRC emacs-lisp (let ((default-directory (concat user-emacs-directory "site-lisp/"))) (when (file-exists-p default-directory) (setq load-path (append (let ((load-path (copy-sequence load-path))) (normal-top-level-add-subdirs-to-load-path)) load-path)))) #+END_SRC Answering /yes/ and /no/ to each question from Emacs can be tedious, a single /y/ or /n/ will suffice. #+BEGIN_SRC emacs-lisp (fset 'yes-or-no-p 'y-or-n-p) #+END_SRC To avoid file system clutter we put all auto saved files in a single directory. #+BEGIN_SRC emacs-lisp (defvar emacs-autosave-directory (concat user-emacs-directory "autosaves/") "This variable dictates where to put auto saves. It is set to a directory called autosaves located wherever your .emacs.d/ is located.") ;; Sets all files to be backed up and auto saved in a single directory. (setq backup-directory-alist `((".*" . ,emacs-autosave-directory)) auto-save-file-name-transforms `((".*" ,emacs-autosave-directory t))) #+END_SRC Set =utf-8= as preferred coding system. #+BEGIN_SRC emacs-lisp (set-language-environment "UTF-8") #+END_SRC By default the =narrow-to-region= command is disabled and issues a warning, because it might confuse new users. I find it useful sometimes, and don't want to be warned. #+BEGIN_SRC emacs-lisp (put 'narrow-to-region 'disabled nil) #+END_SRC Automaticly revert =doc-view=-buffers when the file changes on disk. #+BEGIN_SRC emacs-lisp (add-hook 'doc-view-mode-hook 'auto-revert-mode) #+END_SRC ** Modes There are some modes that are enabled by default that I don't find particularly useful. We create a list of these modes, and disable all of these. #+BEGIN_SRC emacs-lisp (dolist (mode '(tool-bar-mode ; No toolbars, more room for text. scroll-bar-mode ; No scroll bars either. blink-cursor-mode)) ; The blinking cursor gets old. (funcall mode 0)) #+END_SRC Let's apply the same technique for enabling modes that are disabled by default. #+BEGIN_SRC emacs-lisp (dolist (mode '(abbrev-mode ; E.g. sopl -> System.out.println column-number-mode ; Show column number in mode line drag-stuff-global-mode ; Drag stuff around global-company-mode ; Auto-completion everywhere global-git-gutter-mode ; Show changes latest commit global-prettify-symbols-mode ; Greek letters should look greek delete-selection-mode ; Replace selected text dirtrack-mode ; directory tracking in *shell* golden-ratio-mode ; Automatic resizing of windows recentf-mode ; Recently opened files show-paren-mode ; Highlight matching parentheses projectile-global-mode)) ; Manage and navigate projects (funcall mode 1)) (when (version< emacs-version "24.4") (eval-after-load 'auto-compile '((auto-compile-on-save-mode 1)))) ; compile .el files on save #+END_SRC ** Visual Change the color-theme to =leuven=. #+BEGIN_SRC emacs-lisp (load-theme 'leuven t) #+END_SRC =leuven= is my preferred light theme, but =monokai= makes a very nice dark theme. I want to be able to cycle between these. #+BEGIN_SRC emacs-lisp (defun cycle-themes () "Returns a function that lets you cycle your themes." (lexical-let ((themes '#1=(leuven monokai . #1#))) (lambda () (interactive) ;; Rotates the thme cycle and changes the current theme. (load-theme (car (setq themes (cdr themes))) t)))) #+END_SRC Use the [[http://www.levien.com/type/myfonts/inconsolata.html][Inconsolata]] font if it's installed on the system. #+BEGIN_SRC emacs-lisp (cond ((member "Source Code Pro" (font-family-list)) (set-face-attribute 'default nil :font "Source Code Pro-13")) ((member "Inconsolata" (font-family-list)) (set-face-attribute 'default nil :font "Inconsolata-14"))) #+END_SRC [[http://www.eskimo.com/~seldon/diminish.el][diminish.el]] allows you to hide or abbreviate their presence in the modeline. I rarely look at the modeline to find out what minor-modes are enabled, so I disable every global minor-mode, and some for lisp editing. To ensure that the mode is loaded before diminish it, we should use ~with-eval-after-load~. To avoid typing this multiple times a small macro is provided. #+BEGIN_SRC emacs-lisp (defmacro safe-diminish (file mode &optional new-name) `(with-eval-after-load ,file (diminish ,mode ,new-name))) (diminish 'auto-fill-function) (safe-diminish "eldoc" 'eldoc-mode) (safe-diminish "flyspell" 'flyspell-mode) (safe-diminish "helm-mode" 'helm-mode) (safe-diminish "projectile" 'projectile-mode) (safe-diminish "paredit" 'paredit-mode "()") #+END_SRC [[https://github.com/syohex/emacs-git-gutter-fringe][git-gutter-fringe]] gives a great visual indication of where you've made changes since your last commit. There are several packages that performs this task; the reason I've ended up with =git-gutter-fringe= is that it reuses the (already present) fringe, saving a tiny bit of screen-estate. I smuggled some configurations from [[https://github.com/torenord/.emacs.d/][torenord]], providing a cleaner look. #+BEGIN_SRC emacs-lisp (require 'git-gutter-fringe) (dolist (p '((git-gutter:added . "#0c0") (git-gutter:deleted . "#c00") (git-gutter:modified . "#c0c"))) (set-face-foreground (car p) (cdr p)) (set-face-background (car p) (cdr p))) #+END_SRC New in Emacs 24.4 is the =prettify-symbols-mode=! It's neat. #+BEGIN_SRC emacs-lisp (setq-default prettify-symbols-alist '(("lambda" . ?λ) ("delta" . ?Δ) ("gamma" . ?Γ) ("phi" . ?φ) ("psi" . ?ψ))) #+END_SRC ** PDF Tools [[https://github.com/politza/pdf-tools][PDF Tools]] makes a huge improvement on the built-in [[http://www.gnu.org/software/emacs/manual/html_node/emacs/Document-View.html][doc-view-mode]]; the only drawback is the =pdf-tools-install= (which has to be executed before the package can be used) takes a couple of /seconds/ to execute. Instead of running it at init-time, we'll run it whenever a PDF is opened. Note that it's only slow on the first run! #+BEGIN_SRC emacs-lisp (add-hook 'pdf-tools-enabled-hook 'auto-revert-mode) (add-to-list 'auto-mode-alist '("\\.pdf\\'" . pdf-tools-install)) #+END_SRC ** Completion [[https://github.com/auto-complete/auto-complete][Auto-Complete]] has been a part of my config for years, but I want to try out [[http://company-mode.github.io/][company-mode]]. If I code in an environment with good completion, I've made an habit of trying to /guess/ function-names, and looking at the completions for the right one. So I want a pretty aggressive completion system, hence the no delay settings and short prefix length. #+BEGIN_SRC emacs-lisp (setq company-idle-delay 0 company-echo-delay 0 company-dabbrev-downcase nil company-minimum-prefix-length 2 company-selection-wrap-around t company-transformers '(company-sort-by-occurrence company-sort-by-backend-importance)) #+END_SRC ** Helm I've been a long time user of ~ido-mode~ along with ~ido-vertical-mode~, and don't have any particular complaints. Though I've got a feeling I'm missing out on something by not using [[https://github.com/emacs-helm/helm][helm]]. I will [[http://tuhdo.github.io/helm-intro.html][this excellent tutorial]] as a starting point, along with some of the suggested configurations. ~helm~ has a wonderful feature, being able to grep files by ~C-s~ anywhere, which is useful. [[http://beyondgrep.com/][ack]] is a great ~grep~-replacement, and is designed to search source code, so I want to use that if it's available. Note that some changes in bindings are located in the key bindings (found near the end of the configuration). #+BEGIN_SRC emacs-lisp (require 'helm) (require 'helm-config) (setq helm-split-window-in-side-p t helm-M-x-fuzzy-match t helm-buffers-fuzzy-matching t helm-recentf-fuzzy-match t helm-move-to-line-cycle-in-source t projectile-completion-system 'helm) (when (executable-find "ack") (setq helm-grep-default-command "ack -Hn --no-group --no-color %e %p %f" helm-grep-default-recurse-command "ack -H --no-group --no-color %e %p %f")) (set-face-attribute 'helm-selection nil :background "cyan") (helm-mode 1) (helm-projectile-on) (helm-adaptive-mode 1) #+END_SRC ** Calendar Define a function to display week numbers in =calender-mode=. The snippet is from [[http://www.emacswiki.org/emacs/CalendarWeekNumbers][EmacsWiki]]. #+BEGIN_SRC emacs-lisp (defun calendar-show-week (arg) "Displaying week number in calendar-mode." (interactive "P") (copy-face font-lock-constant-face 'calendar-iso-week-face) (set-face-attribute 'calendar-iso-week-face nil :height 0.7) (setq calendar-intermonth-text (and arg '(propertize (format "%2d" (car (calendar-iso-from-absolute (calendar-absolute-from-gregorian (list month day year))))) 'font-lock-face 'calendar-iso-week-face)))) #+END_SRC Evaluate the =calendar-show-week= function. #+BEGIN_SRC emacs-lisp (calendar-show-week t) #+END_SRC Set Monday as the first day of the week, and set my location. #+BEGIN_SRC emacs-lisp (setq calendar-week-start-day 1 calendar-latitude 60.0 calendar-longitude 10.7 calendar-location-name "Oslo, Norway") #+END_SRC ** mu4e and offlineimap I might not be at a computer using my very specific mail-setup, but if my mail-folder exists, then it's probably safe to load. #+BEGIN_SRC emacs-lisp (defvar load-mail-setup (file-exists-p "~/.ifimail")) #+END_SRC I use [[http://www.djcbsoftware.nl/code/mu/mu4e.html][mu4e]] (which is a part of [[http://www.djcbsoftware.nl/code/mu/][mu]]) along with [[http://docs.offlineimap.org/en/latest/][offlineimap]] on one of my computers. *** mu4e mu4e must be informed where it can find your mail and where the different folders of interest are located. Some additional mu4e-tweaks are supplied here as well. ~message-insert-signature~ is an existing Emacs function, that adds your signature prefixed by a ~"-- "~ at the end of the email, which is a convention I don't really follow. I redefine it as a function that adds some newlines and my signature at the top of the email. #+BEGIN_SRC emacs-lisp (when load-mail-setup (eval-after-load 'mu4e '(progn ;; Some basic mu4e settings. (setq mu4e-maildir "~/.ifimail" ; top-level Maildir mu4e-sent-folder "/Sent Items" ; folder for sent messages mu4e-drafts-folder "/INBOX.Drafts" ; unfinished messages mu4e-trash-folder "/INBOX.Trash" ; trashed messages mu4e-get-mail-command "offlineimap" ; offlineimap to fetch mail mu4e-compose-signature "- Lars" ; Sign my name mu4e-update-interval (* 5 60) ; update every 5 min mu4e-confirm-quit nil ; just quit mu4e-view-show-images t ; view images mu4e-html2text-command "html2text -utf8") ; use utf-8 ;; Setup for sending mail. (setq user-full-name "Lars Tveito" ; Your full name user-mail-address "larstvei@ifi.uio.no" ; And email-address smtpmail-smtp-server "smtp.uio.no" ; Host to mail-server smtpmail-smtp-service 465 ; Port to mail-server smtpmail-stream-type 'ssl ; Protocol used for sending send-mail-function 'smtpmail-send-it ; Use smpt to send mail-user-agent 'mu4e-user-agent) ; Use mu4e ;; Register file types that can be handled by ImageMagick. (when (fboundp 'imagemagick-register-types) (imagemagick-register-types)) (add-hook 'mu4e-compose-mode-hook (lambda () (auto-fill-mode 0) (visual-line-mode 1) (ispell-change-dictionary "norsk"))) (add-hook 'mu4e-view-mode-hook (lambda () (visual-line-mode 1))) (defun message-insert-signature () (goto-char (point-min)) (search-forward-regexp "^$") (insert "\n\n\n" mu4e-compose-signature)))) (autoload 'mu4e "mu4e" nil t)) #+END_SRC ** Flyspell Flyspell offers on-the-fly spell checking. We can enable flyspell for all text-modes with this snippet. #+BEGIN_SRC emacs-lisp (add-hook 'text-mode-hook 'turn-on-flyspell) #+END_SRC To use flyspell for programming there is =flyspell-prog-mode=, that only enables spell checking for comments and strings. We can enable it for all programming modes using the =prog-mode-hook=. #+BEGIN_SRC emacs-lisp (add-hook 'prog-mode-hook 'flyspell-prog-mode) #+END_SRC When working with several languages, we should be able to cycle through the languages we most frequently use. Every buffer should have a separate cycle of languages, so that cycling in one buffer does not change the state in a different buffer (this problem occurs if you only have one global cycle). We can implement this by using a [[http://www.gnu.org/software/emacs/manual/html_node/elisp/Closures.html][closure]]. #+BEGIN_SRC emacs-lisp (defun cycle-languages () "Changes the ispell dictionary to the first element in ISPELL-LANGUAGES, and returns an interactive function that cycles the languages in ISPELL-LANGUAGES when invoked." (lexical-let ((ispell-languages '#1=("american" "norsk" . #1#))) (ispell-change-dictionary (car ispell-languages)) (lambda () (interactive) ;; Rotates the languages cycle and changes the ispell dictionary. (ispell-change-dictionary (car (setq ispell-languages (cdr ispell-languages))))))) #+END_SRC =flyspell= signals an error if there is no spell-checking tool is installed. We can advice =turn-on-flyspell= and =flyspell-prog-mode= to only try to enable =flyspell= if a spell-checking tool is available. Also we want to enable cycling the languages by typing =C-c l=, so we bind the function returned from =cycle-languages=. #+BEGIN_SRC emacs-lisp (defadvice turn-on-flyspell (before check nil activate) "Turns on flyspell only if a spell-checking tool is installed." (when (executable-find ispell-program-name) (local-set-key (kbd "C-c l") (cycle-languages)))) #+END_SRC #+BEGIN_SRC emacs-lisp (defadvice flyspell-prog-mode (before check nil activate) "Turns on flyspell only if a spell-checking tool is installed." (when (executable-find ispell-program-name) (local-set-key (kbd "C-c l") (cycle-languages)))) #+END_SRC ** Org I use =org-agenda= along with =org-capture= for appointments and such. #+BEGIN_SRC emacs-lisp (setq org-agenda-start-on-weekday nil ; Show agenda from today. org-agenda-files '("~/Dropbox/agenda.org") ; A list of agenda files. org-agenda-default-appointment-duration 120 ; 2 hours appointments. org-capture-templates ; Template for adding tasks. '(("t" "Oppgave" entry (file+headline "~/Dropbox/agenda.org" "Oppgaver") "** TODO %?" :prepend t) ("a" "Avtale" entry (file+headline "~/Dropbox/agenda.org" "Avtaler") "** %?\n SCHEDULED: %T" :prepend t))) #+END_SRC When editing org-files with source-blocks, we want the source blocks to be themed as they would in their native mode. #+BEGIN_SRC emacs-lisp (setq org-src-fontify-natively t org-src-tab-acts-natively t org-confirm-babel-evaluate nil org-edit-src-content-indentation 0) #+END_SRC This is quite an ugly fix for allowing code markup for expressions like ="this string"=, because the quotation marks causes problems. #+BEGIN_SRC emacs-lisp ;;(require 'org) (eval-after-load "org" '(progn (setcar (nthcdr 2 org-emphasis-regexp-components) " \t\n,") (custom-set-variables `(org-emphasis-alist ',org-emphasis-alist)))) #+END_SRC ** Interactive functions <> =just-one-space= removes all whitespace around a point - giving it a negative argument it removes newlines as well. We wrap a interactive function around it to be able to bind it to a key. In Emacs 24.4 =cycle-spacing= was introduced, and it works like =just-one-space=, but when run in succession it cycles between one, zero and the original number of spaces. #+BEGIN_SRC emacs-lisp (defun cycle-spacing-delete-newlines () "Removes whitespace before and after the point." (interactive) (if (version< emacs-version "24.4") (just-one-space -1) (cycle-spacing -1))) #+END_SRC Often I want to find other occurrences of a word I'm at, or more specifically the symbol (or tag) I'm at. The =isearch-forward-symbol-at-point= in Emacs 24.4 works well for this, but I don't want to be bothered with the =isearch= interface. Rather jump quickly between occurrences of a symbol, or if non is found, don't do anything. #+BEGIN_SRC emacs-lisp (defun jump-to-symbol-internal (&optional backwardp) "Jumps to the next symbol near the point if such a symbol exists. If BACKWARDP is non-nil it jumps backward." (let* ((point (point)) (bounds (find-tag-default-bounds)) (beg (car bounds)) (end (cdr bounds)) (str (isearch-symbol-regexp (find-tag-default))) (search (if backwardp 'search-backward-regexp 'search-forward-regexp))) (goto-char (if backwardp beg end)) (funcall search str nil t) (cond ((<= beg (point) end) (goto-char point)) (backwardp (forward-char (- point beg))) (t (backward-char (- end point)))))) (defun jump-to-previous-like-this () "Jumps to the previous occurrence of the symbol at point." (interactive) (jump-to-symbol-internal t)) (defun jump-to-next-like-this () "Jumps to the next occurrence of the symbol at point." (interactive) (jump-to-symbol-internal)) #+END_SRC I sometimes regret killing the =*scratch*=-buffer, and have realized I never want to actually kill it. I just want to get it out of the way, and clean it up. The function below does just this for the =*scratch*=-buffer, and works like =kill-this-buffer= for any other buffer. It removes all buffer content and buries the buffer (this means making it the least likely candidate for =other-buffer=). #+BEGIN_SRC emacs-lisp (defun kill-this-buffer-unless-scratch () "Works like `kill-this-buffer' unless the current buffer is the ,*scratch* buffer. In witch case the buffer content is deleted and the buffer is buried." (interactive) (if (not (string= (buffer-name) "*scratch*")) (kill-this-buffer) (delete-region (point-min) (point-max)) (switch-to-buffer (other-buffer)) (bury-buffer "*scratch*"))) #+END_SRC To duplicate either selected text or a line we define this interactive function. #+BEGIN_SRC emacs-lisp (defun duplicate-thing (comment) "Duplicates the current line, or the region if active. If an argument is given, the duplicated region will be commented out." (interactive "P") (save-excursion (let ((start (if (region-active-p) (region-beginning) (point-at-bol))) (end (if (region-active-p) (region-end) (point-at-eol)))) (goto-char end) (unless (region-active-p) (newline)) (insert (buffer-substring start end)) (when comment (comment-region start end))))) #+END_SRC To tidy up a buffer we define this function borrowed from [[https://github.com/simenheg][simenheg]]. #+BEGIN_SRC emacs-lisp (defun tidy () "Ident, untabify and unwhitespacify current buffer, or region if active." (interactive) (let ((beg (if (region-active-p) (region-beginning) (point-min))) (end (if (region-active-p) (region-end) (point-max)))) (indent-region beg end) (whitespace-cleanup) (untabify beg (if (< end (point-max)) end (point-max))))) #+END_SRC ** Advice An advice can be given to a function to make it behave differently. This advice makes =eval-last-sexp= (bound to =C-x C-e=) replace the sexp with the value. #+BEGIN_SRC emacs-lisp (defadvice eval-last-sexp (around replace-sexp (arg) activate) "Replace sexp when called with a prefix argument." (if arg (let ((pos (point))) ad-do-it (goto-char pos) (backward-kill-sexp) (forward-sexp)) ad-do-it)) #+END_SRC When interactively changing the theme (using =M-x load-theme=), the current custom theme is not disabled. This often gives weird-looking results; we can advice =load-theme= to always disable themes currently enabled themes. #+BEGIN_SRC emacs-lisp (defadvice load-theme (before disable-before-load (theme &optional no-confirm no-enable) activate) (mapc 'disable-theme custom-enabled-themes)) #+END_SRC ** Presentation-mode When giving talks it's nice to be able to adjust the size of everything (not just a buffer like ~text-scale-mode~ provides). This is not a particularly neat solution, but it works OK. It simply increases/decreases the size of the font. It assumes that your using Inconsolata with size 14 by default. This should be probably be generalized (or maybe be substituted by a package if it's out there). #+BEGIN_SRC emacs-lisp (defun global-scale-default () (interactive) (set-face-attribute 'default nil :font "Inconsolata-14")) (lexical-let ((size 14)) (defun global-scale-up () (interactive) (set-face-attribute 'default nil :font (concat "Inconsolata-" (number-to-string (incf size))))) (defun global-scale-down () (interactive) (set-face-attribute 'default nil :font (concat "Inconsolata-" (number-to-string (decf size)))))) #+END_SRC * Mode specific ** Shell I use =shell= whenever i want to use access the command line in Emacs. I keep a symlink between my =~/.bash_profile= (because I run OS X) and =~/.emacs_bash=, to make the transition between my standard terminal and the shell as small as possible. To be able to quickly switch back and forth between a shell I make use of this little function. #+BEGIN_SRC emacs-lisp (defun toggle-shell () "Jumps to eshell or back." (interactive) (if (string= (buffer-name) "*shell*") (switch-to-prev-buffer) (shell))) #+END_SRC I'd like the =C-l= to work more like the standard terminal (which works like running =clear=), and resolve this by simply removing the buffer-content. Mind that this is not how =clear= works, it simply adds a bunch of newlines, and puts the prompt at the top of the window, so it does not remove anything. In Emacs removing stuff is less of a worry, since we can always undo! #+BEGIN_SRC emacs-lisp (defun clear-comint () "Runs `comint-truncate-buffer' with the `comint-buffer-maximum-size' set to zero." (interactive) (let ((comint-buffer-maximum-size 0)) (comint-truncate-buffer))) #+END_SRC Lastly we should bind our functions. The =toggle-shell= should be a global binding (because we want to be able to switch to a shell from any buffer), but the =clear-shell= should only affect =shell-mode=. #+BEGIN_SRC emacs-lisp (add-hook 'comint-mode-hook (lambda () (local-set-key (kbd "C-l") 'clear-comint))) #+END_SRC ** Lisp I use =Paredit= when editing lisp code, we enable this for all lisp-modes. #+BEGIN_SRC emacs-lisp (dolist (mode '(cider-repl-mode clojure-mode ielm-mode geiser-repl-mode slime-repl-mode lisp-mode emacs-lisp-mode lisp-interaction-mode scheme-mode)) ;; add paredit-mode to all mode-hooks (add-hook (intern (concat (symbol-name mode) "-hook")) 'paredit-mode)) #+END_SRC *** Emacs Lisp In =emacs-lisp-mode= we can enable =eldoc-mode= to display information about a function or a variable in the echo area. #+BEGIN_SRC emacs-lisp (add-hook 'emacs-lisp-mode-hook 'turn-on-eldoc-mode) (add-hook 'lisp-interaction-mode-hook 'turn-on-eldoc-mode) #+END_SRC *** Common lisp I use [[http://www.common-lisp.net/project/slime/][Slime]] along with =lisp-mode= to edit Common Lisp code. Slime provides code evaluation and other great features, a must have for a Common Lisp developer. [[http://www.quicklisp.org/beta/][Quicklisp]] is a library manager for Common Lisp, and you can install Slime following the instructions from the site along with this snippet. #+BEGIN_SRC emacs-lisp (defun activate-slime-helper () (when (file-exists-p "~/.quicklisp/slime-helper.el") (load (expand-file-name "~/.quicklisp/slime-helper.el")) (define-key slime-repl-mode-map (kbd "C-l") 'slime-repl-clear-buffer)) (remove-hook 'lisp-mode-hook #'activate-slime-helper)) (add-hook 'lisp-mode-hook #'activate-slime-helper) #+END_SRC We can specify what Common Lisp program Slime should use (I use SBCL). #+BEGIN_SRC emacs-lisp (setq inferior-lisp-program "sbcl") #+END_SRC More sensible =loop= indentation, borrowed from [[https://github.com/simenheg][simenheg]]. #+BEGIN_SRC emacs-lisp (setq lisp-loop-forms-indentation 6 lisp-simple-loop-indentation 2 lisp-loop-keyword-indentation 6) #+END_SRC #+BEGIN_SRC emacs-lisp #+END_SRC *** Scheme [[http://www.nongnu.org/geiser/][Geiser]] provides features similar to Slime for Scheme editing. Everything works pretty much out of the box, we only need to add auto completion, and specify which scheme-interpreter we prefer. #+BEGIN_SRC emacs-lisp (eval-after-load "geiser" '(setq geiser-active-implementations '(guile))) #+END_SRC ** Java and C The =c-mode-common-hook= is a general hook that work on all C-like languages (C, C++, Java, etc...). I like being able to quickly compile using =C-c C-c= (instead of =M-x compile=), a habit from =latex-mode=. #+BEGIN_SRC emacs-lisp (defun c-setup () (local-set-key (kbd "C-c C-c") 'compile)) (add-hook 'c-mode-common-hook 'c-setup) #+END_SRC Some statements in Java appear often, and become tedious to write out. We can use abbrevs to speed this up. #+BEGIN_SRC emacs-lisp (define-abbrev-table 'java-mode-abbrev-table '(("psv" "public static void main(String[] args) {" nil 0) ("sopl" "System.out.println" nil 0) ("sop" "System.out.printf" nil 0))) #+END_SRC To be able to use the abbrev table defined above, =abbrev-mode= must be activated. #+BEGIN_SRC emacs-lisp (defun java-setup () (abbrev-mode t) (setq-local compile-command (concat "javac " (buffer-name)))) (add-hook 'java-mode-hook 'java-setup) #+END_SRC ** Assembler When writing assembler code I use =#= for comments. By defining =comment-start= we can add comments using =M-;= like in other programming modes. Also in assembler should one be able to compile using =C-c C-c=. #+BEGIN_SRC emacs-lisp (defun asm-setup () (setq comment-start "#") (local-set-key (kbd "C-c C-c") 'compile)) (add-hook 'asm-mode-hook 'asm-setup) #+END_SRC ** LaTeX and org-mode LaTeX export =.tex=-files should be associated with =latex-mode= instead of =tex-mode=. #+BEGIN_SRC emacs-lisp (add-to-list 'auto-mode-alist '("\\.tex\\'" . latex-mode)) #+END_SRC Use ~biblatex~ for bibliography. #+BEGIN_SRC emacs-lisp (setq-default bibtex-dialect 'biblatex) #+END_SRC I like using the [[https://code.google.com/p/minted/][Minted]] package for source blocks in LaTeX. To make org use this we add the following snippet. #+BEGIN_SRC emacs-lisp (eval-after-load 'org '(add-to-list 'org-latex-packages-alist '("" "minted"))) (setq org-latex-listings 'minted) #+END_SRC Because [[https://code.google.com/p/minted/][Minted]] uses [[http://pygments.org][Pygments]] (an external process), we must add the =-shell-escape= option to the =org-latex-pdf-process= commands. The =tex-compile-commands= variable controls the default compile command for Tex- and LaTeX-mode, we can add the flag with a rather dirty statement (if anyone finds a nicer way to do this, please let me know). #+BEGIN_SRC emacs-lisp (eval-after-load 'tex-mode '(setcar (cdr (cddaar tex-compile-commands)) " -shell-escape ")) #+END_SRC When exporting from Org to LaTeX, use ~latexmk~ for compilation. #+BEGIN_SRC emacs-lisp (eval-after-load 'ox-latex '(setq org-latex-pdf-process '("latexmk -pdflatex='pdflatex -shell-escape -interaction nonstopmode' -pdf -f %f"))) #+END_SRC For my thesis, I need to use our university's LaTeX class, this snippet makes that class available. #+BEGIN_SRC emacs-lisp (eval-after-load "ox-latex" '(progn (add-to-list 'org-latex-classes '("ifimaster" "\\documentclass{ifimaster} [DEFAULT-PACKAGES] [PACKAGES] [EXTRA] \\usepackage{babel,csquotes,ifimasterforside,url,varioref}" ("\\chapter{%s}" . "\\chapter*{%s}") ("\\section{%s}" . "\\section*{%s}") ("\\subsection{%s}" . "\\subsection*{%s}") ("\\subsubsection{%s}" . "\\subsubsection*{%s}") ("\\paragraph{%s}" . "\\paragraph*{%s}") ("\\subparagraph{%s}" . "\\subparagraph*{%s}"))) (custom-set-variables '(org-export-allow-bind-keywords t)))) #+END_SRC ** Markdown This makes =.md=-files open in =markdown-mode=. #+BEGIN_SRC emacs-lisp (add-to-list 'auto-mode-alist '("\\.md\\'" . markdown-mode)) #+END_SRC I sometimes use a specialized markdown format, where inline math-blocks can be achieved by surrounding a LaTeX formula with =$math$= and =$/math$=. Writing these out became tedious, so I wrote a small function. #+BEGIN_SRC emacs-lisp (defun insert-markdown-inline-math-block () "Inserts an empty math-block if no region is active, otherwise wrap a math-block around the region." (interactive) (let* ((beg (region-beginning)) (end (region-end)) (body (if (region-active-p) (buffer-substring beg end) ""))) (when (region-active-p) (delete-region beg end)) (insert (concat "$math$ " body " $/math$")) (search-backward " $/math$"))) #+END_SRC Most of my writing in this markup is in Norwegian, so the dictionary is set accordingly. The markup is also sensitive to line breaks, so =auto-fill-mode= is disabled. Of course we want to bind our lovely function to a key! #+BEGIN_SRC emacs-lisp (add-hook 'markdown-mode-hook (lambda () (auto-fill-mode 0) (visual-line-mode 1) (ispell-change-dictionary "norsk") (local-set-key (kbd "C-c b") 'insert-markdown-inline-math-block)) t) #+END_SRC ** Python # [[http://tkf.github.io/emacs-jedi/released/][Jedi]] offers very nice auto completion for =python-mode=. Mind that it is # dependent on some python programs as well, so make sure you follow the # instructions from the site. # #+BEGIN_SRC emacs-lisp # ;; (setq jedi:server-command # ;; (cons "python3" (cdr jedi:server-command)) # ;; python-shell-interpreter "python3") # (add-hook 'python-mode-hook 'jedi:setup) # (setq jedi:complete-on-dot t) # (add-hook 'python-mode-hook 'jedi:ac-setup) # #+END_SRC ** Haskell =haskell-doc-mode= is similar to =eldoc=, it displays documentation in the echo area. Haskell has several indentation modes - I prefer using =haskell-indent=. #+BEGIN_SRC emacs-lisp (add-hook 'haskell-mode-hook 'turn-on-haskell-doc-mode) (add-hook 'haskell-mode-hook 'turn-on-haskell-indent) #+END_SRC ** Matlab =Matlab-mode= works pretty good out of the box, but we can do without the splash screen. #+BEGIN_SRC emacs-lisp (eval-after-load 'matlab '(add-to-list 'matlab-shell-command-switches "-nosplash")) #+END_SRC * Key bindings Inspired by [[http://stackoverflow.com/questions/683425/globally-override-key-binding-in-emacs][this StackOverflow post]] I keep a =custom-bindings-map= that holds all my custom bindings. This map can be activated by toggling a simple =minor-mode= that does nothing more than activating the map. This inhibits other =major-modes= to override these bindings. I keep this at the end of the init-file to make sure that all functions are actually defined. #+BEGIN_SRC emacs-lisp (defvar custom-bindings-map (make-keymap) "A keymap for custom bindings.") #+END_SRC Bindings for [[https://github.com/abo-abo/define-word][define-word]]. #+BEGIN_SRC emacs-lisp (define-key custom-bindings-map (kbd "C-c D") 'define-word-at-point) #+END_SRC Bindings for [[https://github.com/magnars/expand-region.el][expand-region]]. #+BEGIN_SRC emacs-lisp (define-key custom-bindings-map (kbd "C->") 'er/expand-region) (define-key custom-bindings-map (kbd "C-<") 'er/contract-region) #+END_SRC Bindings for [[https://github.com/magnars/multiple-cursors.el][multiple-cursors]]. #+BEGIN_SRC emacs-lisp (define-key custom-bindings-map (kbd "C-c e") 'mc/edit-lines) (define-key custom-bindings-map (kbd "C-c a") 'mc/mark-all-like-this) (define-key custom-bindings-map (kbd "C-c n") 'mc/mark-next-like-this) #+END_SRC Bindings for [[http://magit.github.io][Magit]]. #+BEGIN_SRC emacs-lisp (define-key custom-bindings-map (kbd "C-c m") 'magit-status) #+END_SRC Bindings for [[http://company-mode.github.io/][company-mode]]. #+BEGIN_SRC emacs-lisp (define-key company-active-map (kbd "C-d") 'company-show-doc-buffer) (define-key company-active-map (kbd "C-n") 'company-select-next) (define-key company-active-map (kbd "C-p") 'company-select-previous) (define-key company-active-map (kbd "") 'company-complete) (define-key company-mode-map (kbd "C-:") 'helm-company) (define-key company-active-map (kbd "C-:") 'helm-company) #+END_SRC Bindings for [[http://emacs-helm.github.io/helm/][Helm]]. #+BEGIN_SRC emacs-lisp (define-key custom-bindings-map (kbd "C-c h") 'helm-command-prefix) (define-key custom-bindings-map (kbd "M-x") 'helm-M-x) (define-key custom-bindings-map (kbd "M-y") 'helm-show-kill-ring) (define-key custom-bindings-map (kbd "C-x b") 'helm-mini) (define-key custom-bindings-map (kbd "C-x C-f") 'helm-find-files) (define-key custom-bindings-map (kbd "C-c h o") 'helm-occur) (define-key custom-bindings-map (kbd "C-c h g") 'helm-google-suggest) (define-key custom-bindings-map (kbd "M-i") 'helm-swoop) (define-key custom-bindings-map (kbd "M-I") 'helm-multi-swoop-all) (define-key helm-map (kbd "") 'helm-execute-persistent-action) (define-key helm-map (kbd "C-i") 'helm-execute-persistent-action) (define-key helm-map (kbd "C-z") 'helm-select-action) #+END_SRC Bindings for =move-text=. #+BEGIN_SRC emacs-lisp (define-key custom-bindings-map (kbd "") 'move-text-up) (define-key custom-bindings-map (kbd "") 'move-text-down) #+END_SRC Bind some native Emacs functions. #+BEGIN_SRC emacs-lisp (define-key custom-bindings-map (kbd "C-j") 'newline-and-indent) (define-key custom-bindings-map (kbd "C-c s") 'ispell-word) (define-key custom-bindings-map (kbd "C-c c") 'org-capture) (define-key custom-bindings-map (kbd "C-x m") 'mu4e) (define-key custom-bindings-map (kbd "C-c t") (lambda () (interactive) (org-agenda nil "n"))) #+END_SRC Bind the functions defined [[sec:defuns][above]]. #+BEGIN_SRC emacs-lisp (define-key global-map (kbd "M-p") 'jump-to-previous-like-this) (define-key global-map (kbd "M-n") 'jump-to-next-like-this) (define-key custom-bindings-map (kbd "M-,") 'jump-to-previous-like-this) (define-key custom-bindings-map (kbd "M-.") 'jump-to-next-like-this) (define-key custom-bindings-map (kbd "C-c .") (cycle-themes)) (define-key custom-bindings-map (kbd "C-x k") 'kill-this-buffer-unless-scratch) (define-key custom-bindings-map (kbd "C-c C-0") 'global-scale-default) (define-key custom-bindings-map (kbd "C-c C-=") 'global-scale-up) (define-key custom-bindings-map (kbd "C-c C--") 'global-scale-down) (define-key custom-bindings-map (kbd "C-x t") 'toggle-shell) (define-key custom-bindings-map (kbd "C-c j") 'cycle-spacing-delete-newlines) (define-key custom-bindings-map (kbd "C-c d") 'duplicate-thing) (define-key custom-bindings-map (kbd "") 'tidy) #+END_SRC Lastly we need to activate the map by creating and activating the =minor-mode=. #+BEGIN_SRC emacs-lisp (define-minor-mode custom-bindings-mode "A mode that activates custom-bindings." t nil custom-bindings-map) #+END_SRC * License My Emacs configurations written in Org mode. Copyright (c) 2013 - 2015 Lars Tveito This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see .