|
|
||
|---|---|---|
| init.el | ||
| init.org | ||
| LICENSE.md | ||
| README.org | ||
Emacs configuration file
About
This is an Emacs configuration file written in Org mode. It is an attempt
to keep my ~/.emacs.d tidy, but still be able to keep it all in one
file. I aim to briefly explain all my configurations as I go along!
I would not recommend using this configuration as-is, because it probably contains a lot you don't really need. I do, however, hope people find some golden nuggets that they can smuggle into their own configs.
If you really do want to try this config out, this is how I'd go about it:
Clone the repo.
git clone https://github.com/larstvei/dot-emacs
Backup your old ~/.emacs.d (if necessary).
mv ~/.emacs.d ~/.emacs.d-bak
Backup your old ~/.emacs-file (if necessary).
mv ~/.emacs ~/.emacs-bakAnd finally
mv dot-emacs ~/.emacs.dOn first run it should install a bunch of packages (this might take a while), and you might have to restart your Emacs the first time. If you experience bugs, please let me know!
Configurations
Meta
All changes to the configuration should be done in init.org, not in
init.el. Any changes in the init.el will be overwritten by saving
init.org. The init.el in this repo should not be tracked by git, and
is replaced the first time Emacs is started (assuming it has been renamed
to ~/.emacs.d).
Emacs can't load .org-files directly, but org-mode provides functions
to extract the code blocks and write them to a file. There are multiple
ways of handling this; like suggested by this StackOverflow post, one
could just use org-babel-load-file, but I had problems with
byte-compilation. Previously I tracked both the org.- and el.-files,
but the git commits got a little messy. So here is a new approach.
When this configuration is loaded for the first time, the init.el is
the file that is loaded. It looks like this:
;; This file replaces itself with the actual configuration at first run.
;; We can't tangle without org!
(require 'org)
;; Open the configuration
(find-file (concat user-emacs-directory "init.org"))
;; tangle it
(org-babel-tangle)
;; load it
(load-file (concat user-emacs-directory "init.el"))
;; finally byte-compile it
(byte-compile-file (concat user-emacs-directory "init.el"))It tangles the org-file, so that this file is overwritten with the actual configuration.
There is no reason to track the init.el that is generated; by running
the following command git will not bother tracking it:
git update-index --assume-unchanged init.el
If one wishes to make changes to the repo-version of init.el start
tracking again with:
git update-index --no-assume-unchanged init.elI want lexical scoping for the init-file, which can be specified in the header. The first line of the configuration is as follows:
;;; -*- lexical-binding: t -*-
The init.el should (after the first run) mirror the source blocks in
the init.org. We can use C-c C-v t to run org-babel-tangle, which
extracts the code blocks from the current file into a source-specific
file (in this case a .el-file).
To avoid doing this each time a change is made we can add a function to
the after-save-hook ensuring to always tangle and byte-compile the
org-document after changes.
(defun tangle-init ()
"If the current buffer is 'init.org' the code-blocks are
tangled, and the tangled file is compiled."
(when (equal (buffer-file-name)
(expand-file-name (concat user-emacs-directory "init.org")))
;; Avoid running hooks when tangling.
(let ((prog-mode-hook nil))
(org-babel-tangle)
(byte-compile-file (concat user-emacs-directory "init.el")))))
(add-hook 'after-save-hook 'tangle-init)
I'd like to keep a few settings private, so we load a private.el if it
exists after the init-file has loaded.
(add-hook
'after-init-hook
(lambda ()
(let ((private-file (concat user-emacs-directory "private.el")))
(when (file-exists-p private-file)
(load-file private-file))
(when custom-file
(load-file custom-file))
(server-start))))
A common optimization is to temporarily disable garbage collection during
initialization. Here, we set the gc-cons-threshold to a ridiculously large
number, and restore the default value after initialization.
(let ((old-gc-treshold gc-cons-threshold))
(setq gc-cons-threshold most-positive-fixnum)
(add-hook 'after-init-hook
(lambda () (setq gc-cons-threshold old-gc-treshold))))Packages
Managing extensions for Emacs is simplified using package which is
built in to Emacs 24 and newer. To load downloaded packages we need to
initialize package. cl is a library that contains many functions from
Common Lisp, and comes in handy quite often, so we want to make sure it's
loaded, along with package, which is obviously needed.
(require 'package)
(package-initialize)Packages can be fetched from different mirrors, melpa is the largest archive and is well maintained.
(setq package-archives
'(("gnu" . "https://elpa.gnu.org/packages/")
("MELPA" . "https://melpa.org/packages/"))
package-archive-priorities
'(("MELPA" . 5)
("gnu" . 0)))The configuration assumes that the packages listed below are installed. To ensure we install missing packages if they are missing.
(let* ((package--builtins nil)
(packages
'(auto-compile ; automatically compile Emacs Lisp libraries
cider ; Clojure Interactive Development Environment
clj-refactor ; Commands for refactoring Clojure code
company ; Modular text completion framework
company-coq ; A collection of extensions PG's Coq mode
counsel ; Various completion functions using Ivy
counsel-projectile ; Ivy integration for Projectile
define-word ; display the definition of word at point
diff-hl ; Highlight uncommitted changes using VC
doom-themes ; An opinionated pack of modern color-themes
erlang ; Erlang major mode
expand-region ; Increase selected region by semantic units
focus ; Dim color of text in surrounding sections
golden-ratio ; Automatic resizing windows to golden ratio
haskell-mode ; A Haskell editing mode
jedi ; Python auto-completion for Emacs
js2-mode ; Improved JavaScript editing mode
lsp-mode ; LSP mode
lsp-java ; Java support for lsp-mode
magit ; control Git from Emacs
markdown-mode ; Emacs Major mode for Markdown-formatted files
maude-mode ; Emacs mode for the programming language Maude
minizinc-mode ; Major mode for MiniZinc code
multiple-cursors ; Multiple cursors for Emacs
olivetti ; Minor mode for a nice writing environment
org ; Outline-based notes management and organizer
org-bullets ; Show bullets in org-mode as UTF-8 characters
paredit ; minor mode for editing parentheses
pdf-tools ; Emacs support library for PDF files
projectile ; Manage and navigate projects in Emacs easily
proof-general ; A generic Emacs interface for proof assistants
racket-mode ; Major mode for Racket language
slime ; Superior Lisp Interaction Mode for Emacs
smex ; M-x interface with Ido-style fuzzy matching
try ; Try out Emacs packages
vterm ; A terminal via libvterm
which-key ; Display available keybindings in popup
z3-mode))) ; z3/SMTLIBv2 interactive development
(when (memq window-system '(mac ns))
(push 'exec-path-from-shell packages)
(push 'reveal-in-osx-finder packages))
(let ((packages (seq-remove 'package-installed-p packages)))
(print packages)
(when packages
;; Install uninstalled packages
(package-refresh-contents)
(mapc 'package-install packages))))Mac OS X
I run this configuration mostly on Mac OS X, so we need a couple of
settings to make things work smoothly. In the package section
exec-path-from-shell is included (only if you're running OS X), this is
to include environment-variables from the shell. It makes using Emacs
along with external processes a lot simpler. I also prefer using the
Command-key as the Meta-key.
(when (memq window-system '(mac ns))
(setq ns-pop-up-frames nil
mac-option-modifier nil
mac-command-modifier 'meta
x-select-enable-clipboard t)
(exec-path-from-shell-initialize)
(when (fboundp 'mac-auto-operator-composition-mode)
(mac-auto-operator-composition-mode 1)))Sane defaults
These are what I consider to be saner defaults.
We can set variables to whatever value we'd like using setq.
(setq auto-revert-interval 1 ; Refresh buffers fast
default-input-method "TeX" ; Use TeX when toggling input method
echo-keystrokes 0.1 ; Show keystrokes asap
inhibit-startup-screen t ; No splash screen please
initial-scratch-message nil ; Clean scratch buffer
recentf-max-saved-items 100 ; Show more recent files
ring-bell-function 'ignore ; Quiet
scroll-margin 1 ; Space between cursor and top/bottom
sentence-end-double-space nil ; No double space
custom-file ; Customizations in a separate file
(concat user-emacs-directory "custom.el"))
;; Some mac-bindings interfere with Emacs bindings.
(when (boundp 'mac-pass-command-to-system)
(setq mac-pass-command-to-system nil))
Some variables are buffer-local, so changing them using setq will only
change them in a single buffer. Using setq-default we change the
buffer-local variable's default value.
(setq-default tab-width 4 ; Smaller tabs
fill-column 79 ; Maximum line width
truncate-lines t ; Don't fold lines
indent-tabs-mode nil ; Use spaces instead of tabs
split-width-threshold 160 ; Split verticly by default
split-height-threshold nil ; Split verticly by default
frame-resize-pixelwise t ; Fine-grained frame resize
auto-fill-function 'do-auto-fill) ; Auto-fill-mode everywhere
The load-path specifies where Emacs should look for .el-files (or
Emacs lisp files). I have a directory called site-lisp where I keep all
extensions that have been installed manually (these are mostly my own
projects).
(let ((default-directory (concat user-emacs-directory "site-lisp/")))
(when (file-exists-p default-directory)
(setq load-path
(append
(let ((load-path (copy-sequence load-path)))
(normal-top-level-add-subdirs-to-load-path)) load-path))))Answering yes and no to each question from Emacs can be tedious, a single y or n will suffice.
(fset 'yes-or-no-p 'y-or-n-p)To avoid file system clutter we put all auto saved files in a single directory.
(defvar emacs-autosave-directory
(concat user-emacs-directory "autosaves/")
"This variable dictates where to put auto saves. It is set to a
directory called autosaves located wherever your .emacs.d/ is
located.")
;; Sets all files to be backed up and auto saved in a single directory.
(setq backup-directory-alist
`((".*" . ,emacs-autosave-directory))
auto-save-file-name-transforms
`((".*" ,emacs-autosave-directory t)))
Set utf-8 as preferred coding system.
(set-language-environment "UTF-8")
By default the narrow-to-region command is disabled and issues a
warning, because it might confuse new users. I find it useful sometimes,
and don't want to be warned.
(put 'narrow-to-region 'disabled nil)
Automaticly revert doc-view-buffers when the file changes on disk.
(add-hook 'doc-view-mode-hook 'auto-revert-mode)Modes
There are some modes that are enabled by default that I don't find particularly useful. We create a list of these modes, and disable all of these.
(dolist (mode
'(tool-bar-mode ; No toolbars, more room for text
scroll-bar-mode ; No scroll bars either
blink-cursor-mode)) ; The blinking cursor gets old
(funcall mode 0))Let's apply the same technique for enabling modes that are disabled by default.
(dolist (mode
'(abbrev-mode ; E.g. sopl -> System.out.println
column-number-mode ; Show column number in mode line
delete-selection-mode ; Replace selected text
dirtrack-mode ; directory tracking in *shell*
global-company-mode ; Auto-completion everywhere
global-diff-hl-mode ; Highlight uncommitted changes
global-so-long-mode ; Mitigate performance for long lines
counsel-projectile-mode ; Manage and navigate projects
recentf-mode ; Recently opened files
show-paren-mode ; Highlight matching parentheses
which-key-mode)) ; Available keybindings in popup
(funcall mode 1))
(when (version< emacs-version "24.4")
(eval-after-load 'auto-compile
'((auto-compile-on-save-mode 1)))) ; compile .el files on saveVisual
Change the color-theme to leuven.
(load-theme 'doom-one-light t)
leuven is my preferred light theme, but monokai makes a very nice
dark theme. I want to be able to cycle between these.
(defun cycle-themes ()
"Returns a function that lets you cycle your themes."
(let ((themes '#1=(doom-one-light doom-one . #1#)))
(lambda ()
(interactive)
;; Rotates the thme cycle and changes the current theme.
(load-theme (car (setq themes (cdr themes))) t)
(message (concat "Switched to " (symbol-name (car themes)))))))Use the Inconsolata font if it's installed on the system.
(cond ((member "Hasklig" (font-family-list))
(set-face-attribute 'default nil :font "Hasklig-14"))
((member "Inconsolata" (font-family-list))
(set-face-attribute 'default nil :font "Inconsolata-14")))Let's pick out the my favorite elements from elegant emacs! It looks really nice.
(add-to-list 'default-frame-alist '(internal-border-width . 24))
;; simplified mode line
(define-key mode-line-major-mode-keymap [header-line]
(lookup-key mode-line-major-mode-keymap [mode-line]))
(defun mode-line-render (left right)
(let* ((available-width (- (window-total-width) (length left))))
(format (format "%%s %%%ds" available-width) left right)))
(setq-default
header-line-format
'((:eval
(propertize
(mode-line-render
(format-mode-line
(list (propertize "☰" 'face `(:inherit mode-line-buffer-id)
'help-echo "Mode(s) menu"
'mouse-face 'mode-line-highlight
'local-map mode-line-major-mode-keymap)
" %b "
(if (and buffer-file-name (buffer-modified-p))
(propertize "(modified)" 'face `(:inherit font-lock-comment-face)))))
(format-mode-line
(propertize "%4l:%2c " 'face
`(:inherit font-lock-comment-face))))
'face `(:underline ,(face-foreground 'font-lock-comment-face))))))
(setq-default mode-line-format nil)
New in Emacs 24.4 is the prettify-symbols-mode! It's neat.
(setq-default prettify-symbols-alist '(("lambda" . ?λ)
("delta" . ?Δ)
("gamma" . ?Γ)
("phi" . ?φ)
("psi" . ?ψ)))Olivetti is a package that simply centers the text of a buffer. It is very simple and beautiful. The default width is just a bit short.
(with-eval-after-load 'olivetti
(setq-default olivetti-body-width 82)
(remove-hook 'olivetti-mode-on-hook 'visual-line-mode))Ivy
Let's try Ivy in favor of helm.
(setq ivy-wrap t
ivy-height 25
ivy-use-virtual-buffers t
ivy-count-format "(%d/%d) "
ivy-on-del-error-function 'ignore)
(ivy-mode 1)PDF Tools
PDF Tools makes a huge improvement on the built-in doc-view-mode; the only
drawback is the pdf-tools-install (which has to be executed before the
package can be used) takes a couple of seconds to execute. Instead of
running it at init-time, we'll run it whenever a PDF is opened. Note that
it's only slow on the first run!
(add-to-list 'auto-mode-alist '("\\.pdf\\'" . pdf-tools-install))(add-hook 'pdf-view-mode-hook
(lambda () (setq header-line-format nil)))Completion
Auto-Complete has been a part of my config for years, but I want to try out company-mode. If I code in an environment with good completion, I've made an habit of trying to guess function-names, and looking at the completions for the right one. So I want a pretty aggressive completion system, hence the no delay settings and short prefix length.
(setq company-idle-delay 0
company-echo-delay 0
company-dabbrev-downcase nil
company-minimum-prefix-length 2
company-selection-wrap-around t
company-transformers '(company-sort-by-occurrence
company-sort-by-backend-importance))Spelling
Flyspell offers on-the-fly spell checking. We can enable flyspell for all text-modes with this snippet.
(add-hook 'text-mode-hook 'turn-on-flyspell)
To use flyspell for programming there is flyspell-prog-mode, that only
enables spell checking for comments and strings. We can enable it for all
programming modes using the prog-mode-hook.
(add-hook 'prog-mode-hook 'flyspell-prog-mode)When working with several languages, we should be able to cycle through the languages we most frequently use. Every buffer should have a separate cycle of languages, so that cycling in one buffer does not change the state in a different buffer (this problem occurs if you only have one global cycle). We can implement this by using a closure.
(defun cycle-languages ()
"Changes the ispell dictionary to the first element in
ISPELL-LANGUAGES, and returns an interactive function that cycles
the languages in ISPELL-LANGUAGES when invoked."
(let ((ispell-languages '#1=("american" "norsk" . #1#)))
(ispell-change-dictionary (car ispell-languages))
(lambda ()
(interactive)
;; Rotates the languages cycle and changes the ispell dictionary.
(ispell-change-dictionary
(car (setq ispell-languages (cdr ispell-languages)))))))
flyspell signals an error if there is no spell-checking tool is
installed. We can advice turn-on-flyspell and flyspell-prog-mode to
only try to enable flyspell if a spell-checking tool is available. Also
we want to enable cycling the languages by typing C-c l, so we bind the
function returned from cycle-languages.
(defadvice turn-on-flyspell (before check nil activate)
"Turns on flyspell only if a spell-checking tool is installed."
(when (executable-find ispell-program-name)
(local-set-key (kbd "C-c l") (cycle-languages))))(defadvice flyspell-prog-mode (before check nil activate)
"Turns on flyspell only if a spell-checking tool is installed."
(when (executable-find ispell-program-name)
(local-set-key (kbd "C-c l") (cycle-languages))))Org
When editing org-files with source-blocks, we want the source blocks to be themed as they would in their native mode.
(setq org-src-fontify-natively t
org-src-tab-acts-natively t
org-confirm-babel-evaluate nil
org-edit-src-content-indentation 0)
This is quite an ugly fix for allowing code markup for expressions like
"this string", because the quotation marks causes problems.
(with-eval-after-load 'org
(require 'org-tempo)
(setcar (nthcdr 2 org-emphasis-regexp-components) " \t\n,")
(custom-set-variables `(org-emphasis-alist ',org-emphasis-alist)))Enable org-bullets when opening org-files.
(add-hook 'org-mode-hook (lambda () (org-bullets-mode 1)))Interactive functions
<<sec:defuns>>
just-one-space removes all whitespace around a point - giving it a
negative argument it removes newlines as well. We wrap a interactive
function around it to be able to bind it to a key. In Emacs 24.4
cycle-spacing was introduced, and it works like just-one-space, but
when run in succession it cycles between one, zero and the original
number of spaces.
(defun cycle-spacing-delete-newlines ()
"Removes whitespace before and after the point."
(interactive)
(if (version< emacs-version "24.4")
(just-one-space -1)
(cycle-spacing -1)))
Often I want to find other occurrences of a word I'm at, or more
specifically the symbol (or tag) I'm at. The
isearch-forward-symbol-at-point in Emacs 24.4 works well for this, but
I don't want to be bothered with the isearch interface. Rather jump
quickly between occurrences of a symbol, or if non is found, don't do
anything.
(defun jump-to-symbol-internal (&optional backwardp)
"Jumps to the next symbol near the point if such a symbol
exists. If BACKWARDP is non-nil it jumps backward."
(let* ((point (point))
(bounds (find-tag-default-bounds))
(beg (car bounds)) (end (cdr bounds))
(str (isearch-symbol-regexp (find-tag-default)))
(search (if backwardp 'search-backward-regexp
'search-forward-regexp)))
(goto-char (if backwardp beg end))
(funcall search str nil t)
(cond ((<= beg (point) end) (goto-char point))
(backwardp (forward-char (- point beg)))
(t (backward-char (- end point))))))
(defun jump-to-previous-like-this ()
"Jumps to the previous occurrence of the symbol at point."
(interactive)
(jump-to-symbol-internal t))
(defun jump-to-next-like-this ()
"Jumps to the next occurrence of the symbol at point."
(interactive)
(jump-to-symbol-internal))
I sometimes regret killing the *scratch*-buffer, and have realized I
never want to actually kill it. I just want to get it out of the way, and
clean it up. The function below does just this for the
*scratch*-buffer, and works like kill-this-buffer for any other
buffer. It removes all buffer content and buries the buffer (this means
making it the least likely candidate for other-buffer).
(defun kill-this-buffer-unless-scratch ()
"Works like `kill-this-buffer' unless the current buffer is the
,*scratch* buffer. In witch case the buffer content is deleted and
the buffer is buried."
(interactive)
(if (not (string= (buffer-name) "*scratch*"))
(kill-this-buffer)
(delete-region (point-min) (point-max))
(switch-to-buffer (other-buffer))
(bury-buffer "*scratch*")))To duplicate either selected text or a line we define this interactive function.
(defun duplicate-thing (comment)
"Duplicates the current line, or the region if active. If an argument is
given, the duplicated region will be commented out."
(interactive "P")
(save-excursion
(let ((start (if (region-active-p) (region-beginning) (point-at-bol)))
(end (if (region-active-p) (region-end) (point-at-eol)))
(fill-column most-positive-fixnum))
(goto-char end)
(unless (region-active-p)
(newline))
(insert (buffer-substring start end))
(when comment (comment-region start end)))))To tidy up a buffer we define this function borrowed from simenheg.
(defun tidy ()
"Ident, untabify and unwhitespacify current buffer, or region if active."
(interactive)
(let ((beg (if (region-active-p) (region-beginning) (point-min)))
(end (if (region-active-p) (region-end) (point-max))))
(indent-region beg end)
(whitespace-cleanup)
(untabify beg (if (< end (point-max)) end (point-max)))))Org mode does currently not support synctex (which enables you to jump from a point in your TeX-file to the corresponding point in the pdf), and it seems like a tricky problem.
Calling this function from an org-buffer jumps to the corresponding section in the exported pdf (given that the pdf-file exists), using pdf-tools.
(defun org-sync-pdf ()
(interactive)
(let ((headline (nth 4 (org-heading-components)))
(pdf (concat (file-name-base (buffer-name)) ".pdf")))
(when (file-exists-p pdf)
(find-file-other-window pdf)
(pdf-links-action-perform
(cl-find headline (pdf-info-outline pdf)
:key (lambda (alist) (cdr (assoc 'title alist)))
:test 'string-equal)))))Advice
An advice can be given to a function to make it behave differently. This
advice makes eval-last-sexp (bound to C-x C-e) replace the sexp with
the value.
(defadvice eval-last-sexp (around replace-sexp (arg) activate)
"Replace sexp when called with a prefix argument."
(if arg
(let ((pos (point)))
ad-do-it
(goto-char pos)
(backward-kill-sexp)
(forward-sexp))
ad-do-it))
When interactively changing the theme (using M-x load-theme), the
current custom theme is not disabled. This often gives weird-looking
results; we can advice load-theme to always disable themes currently
enabled themes.
(defadvice load-theme
(before disable-before-load (theme &optional no-confirm no-enable) activate)
(mapc 'disable-theme custom-enabled-themes))global-scale-mode
These functions provide something close to text-scale-mode, but for every
buffer, including the minibuffer and mode line.
(let* ((default (face-attribute 'default :height))
(size default))
(defun global-scale-default ()
(interactive)
(global-scale-internal (setq size default)))
(defun global-scale-up ()
(interactive)
(global-scale-internal (setq size (+ size 20))))
(defun global-scale-down ()
(interactive)
(global-scale-internal (setq size (- size 20))))
(defun global-scale-internal (arg)
(set-face-attribute 'default (selected-frame) :height arg)
(set-temporary-overlay-map
(let ((map (make-sparse-keymap)))
(define-key map (kbd "C-=") 'global-scale-up)
(define-key map (kbd "C-+") 'global-scale-up)
(define-key map (kbd "C--") 'global-scale-down)
(define-key map (kbd "C-0") 'global-scale-default) map))))Mode specific
LSP
LSP mode works really well, especially with languages like Java, which traditionally has had quite poor Emacs support.
(with-eval-after-load 'lsp-mode
(define-key lsp-mode-map (kbd "C-c f") lsp-command-map)
(add-hook 'lsp-mode-hook #'lsp-enable-which-key-integration))Compilation
I often run latexmk -pdf -pvc in a compilation buffer, which recompiles
the latex-file whenever it is changed. This often results in annoyingly
large compilation buffers; the following snippet limits the buffer size in
accordance with comint-buffer-maximum-size, which defaults to 1024 lines.
(add-hook 'compilation-filter-hook 'comint-truncate-buffer)Shell
Inspired by torenord, I maintain quick access to shell buffers with bindings
M-1 to M-9. In addition, the M-§ (on an international English
keyboard) toggles between the last visited shell, and the last visited
non-shell buffer. The following functions facilitate this, and are bound in
the /larstvei/emacs/src/commit/f7bdce020a05c0e0a4f763a2c62c2cbb94a91ee1/Key%20bindings section.
(let ((last-vterm ""))
(defun toggle-vterm ()
(interactive)
(cond ((string-match-p "^\\vterm<[1-9][0-9]*>$" (buffer-name))
(goto-non-vterm-buffer))
((get-buffer last-vterm) (switch-to-buffer last-vterm))
(t (vterm (setq last-vterm "vterm<1>")))))
(defun switch-vterm (n)
(let ((buffer-name (format "vterm<%d>" n)))
(setq last-vterm buffer-name)
(cond ((get-buffer buffer-name)
(switch-to-buffer buffer-name))
(t (vterm buffer-name)
(rename-buffer buffer-name)))))
(defun goto-non-vterm-buffer ()
(let* ((r "^\\vterm<[1-9][0-9]*>$")
(vterm-buffer-p (lambda (b) (string-match-p r (buffer-name b))))
(non-vterms (cl-remove-if vterm-buffer-p (buffer-list))))
(when non-vterms
(switch-to-buffer (car non-vterms))))))
Don't query whether or not the shell-buffer should be killed, just kill
it.
(defadvice vterm (after kill-with-no-query nil activate)
(set-process-query-on-exit-flag (get-buffer-process ad-return-value) nil))Use zsh:
(setq vterm-shell "/usr/local/bin/zsh")
I'd like the C-l to work more like the standard terminal (which works
like running clear), and resolve this by simply removing the
buffer-content. Mind that this is not how clear works, it simply adds a
bunch of newlines, and puts the prompt at the top of the window, so it
does not remove anything. In Emacs removing stuff is less of a worry,
since we can always undo!
(defun clear-comint ()
"Runs `comint-truncate-buffer' with the
`comint-buffer-maximum-size' set to zero."
(interactive)
(let ((comint-buffer-maximum-size 0))
(comint-truncate-buffer)))Lisp
I use Paredit when editing lisp code, we enable this for all lisp-modes.
(dolist (mode '(cider-repl-mode
clojure-mode
ielm-mode
racket-mode
racket-repl-mode
slime-repl-mode
lisp-mode
emacs-lisp-mode
lisp-interaction-mode
scheme-mode))
;; add paredit-mode to all mode-hooks
(add-hook (intern (concat (symbol-name mode) "-hook")) 'paredit-mode))Emacs Lisp
In emacs-lisp-mode we can enable eldoc-mode to display information
about a function or a variable in the echo area.
(add-hook 'emacs-lisp-mode-hook 'turn-on-eldoc-mode)
(add-hook 'lisp-interaction-mode-hook 'turn-on-eldoc-mode)Common lisp
I use Slime along with lisp-mode to edit Common Lisp code. Slime
provides code evaluation and other great features, a must have for a
Common Lisp developer. Quicklisp is a library manager for Common Lisp,
and you can install Slime following the instructions from the site along
with this snippet.
(defun activate-slime-helper ()
(when (file-exists-p "~/.quicklisp/slime-helper.el")
(load (expand-file-name "~/.quicklisp/slime-helper.el"))
(define-key slime-repl-mode-map (kbd "C-l")
'slime-repl-clear-buffer))
(remove-hook 'common-lisp-mode-hook #'activate-slime-helper))
(add-hook 'common-lisp-mode-hook #'activate-slime-helper)We can specify what Common Lisp program Slime should use (I use SBCL).
(setq inferior-lisp-program "sbcl")
More sensible loop indentation, borrowed from simenheg.
(setq lisp-loop-forms-indentation 6
lisp-simple-loop-indentation 2
lisp-loop-keyword-indentation 6)Python
(setq python-shell-interpreter "python3")
(add-hook 'python-mode-hook
(lambda () (setq forward-sexp-function nil)))Java and C
The c-mode-common-hook is a general hook that work on all C-like
languages (C, C++, Java, etc…). I like being able to quickly compile
using C-c C-c (instead of M-x compile), a habit from latex-mode.
(defun c-setup ()
(local-set-key (kbd "C-c C-c") 'compile))
(add-hook 'c-mode-hook 'c-setup)Some statements in Java appear often, and become tedious to write out. We can use abbrevs to speed this up.
(define-abbrev-table 'java-mode-abbrev-table
'(("psv" "public static void main(String[] args) {" nil 0)
("sopl" "System.out.println" nil 0)
("sop" "System.out.printf" nil 0)))
To be able to use the abbrev table defined above, abbrev-mode must be
activated.
(add-hook 'java-mode-hook 'lsp)
(add-hook 'java-mode-hook 'yas-minor-mode)Assembler
When writing assembler code I use # for comments. By defining
comment-start we can add comments using M-; like in other programming
modes. Also in assembler should one be able to compile using C-c C-c.
(defun asm-setup ()
(setq comment-start "#")
(local-set-key (kbd "C-c C-c") 'compile))
(add-hook 'asm-mode-hook 'asm-setup)LaTeX and org-mode LaTeX export
.tex-files should be associated with latex-mode instead of
tex-mode.
(add-to-list 'auto-mode-alist '("\\.tex\\'" . latex-mode))Use latexmk for compilation by default.
(add-hook 'LaTeX-mode-hook
(lambda ()
(add-hook 'hack-local-variables-hook
(lambda ()
(setq-local compile-command
(concat "latexmk -pdf -pvc "
(if (eq TeX-master t)
(file-name-base (buffer-name))
TeX-master))))
t t)))
Use biblatex for bibliography.
(setq-default bibtex-dialect 'biblatex)I like using the Minted package for source blocks in LaTeX. To make org use this we add the following snippet.
(eval-after-load 'org
'(add-to-list 'org-latex-packages-alist '("" "minted")))
(setq org-latex-listings 'minted)
Because Minted uses Pygments (an external process), we must add the
-shell-escape option to the org-latex-pdf-process commands. The
tex-compile-commands variable controls the default compile command for
Tex- and LaTeX-mode, we can add the flag with a rather dirty statement
(if anyone finds a nicer way to do this, please let me know).
(eval-after-load 'tex-mode
'(setcar (cdr (cddaar tex-compile-commands)) " -shell-escape "))
When exporting from Org to LaTeX, use latexmk for compilation.
(eval-after-load 'ox-latex
'(setq org-latex-pdf-process
'("latexmk -pdflatex='pdflatex -shell-escape -interaction nonstopmode' -pdf -f %f")))For my thesis, I need to use our university's LaTeX class, this snippet makes that class available.
(eval-after-load "ox-latex"
'(progn
(add-to-list 'org-latex-classes
'("ifimaster"
"\\documentclass{ifimaster}
[DEFAULT-PACKAGES]
[PACKAGES]
[EXTRA]
\\usepackage{babel,csquotes,ifimasterforside,url,varioref}"
("\\chapter{%s}" . "\\chapter*{%s}")
("\\section{%s}" . "\\section*{%s}")
("\\subsection{%s}" . "\\subsection*{%s}")
("\\subsubsection{%s}" . "\\subsubsection*{%s}")
("\\paragraph{%s}" . "\\paragraph*{%s}")
("\\subparagraph{%s}" . "\\subparagraph*{%s}")))
(add-to-list 'org-latex-classes
'("easychair" "\\documentclass{easychair}"
("\\section{%s}" . "\\section*{%s}")
("\\subsection{%s}" . "\\subsection*{%s}")
("\\subsubsection{%s}" . "\\subsubsection*{%s}")
("\\paragraph{%s}" . "\\paragraph*{%s}")
("\\subparagraph{%s}" . "\\subparagraph*{%s}")))
(custom-set-variables '(org-export-allow-bind-keywords t))))
Use Emacs for opening the PDF file, when invoking C-c C-e l o.
(require 'org)
(add-to-list 'org-file-apps '("\\.pdf\\'" . emacs))Haskell
haskell-doc-mode is similar to eldoc, it displays documentation in
the echo area. Haskell has several indentation modes - I prefer using
haskell-indent.
(add-hook 'haskell-mode-hook 'interactive-haskell-mode)
(add-hook 'haskell-mode-hook 'turn-on-haskell-doc-mode)
(add-hook 'haskell-mode-hook 'turn-on-haskell-indent)Due to a bug in haskell-mode I have to keep this monstrosity in my config…
(setq haskell-process-args-ghci
'("-ferror-spans" "-fshow-loaded-modules"))
(setq haskell-process-args-cabal-repl
'("--ghc-options=-ferror-spans -fshow-loaded-modules"))
(setq haskell-process-args-stack-ghci
'("--ghci-options=-ferror-spans -fshow-loaded-modules"
"--no-build" "--no-load"))
(setq haskell-process-args-cabal-new-repl
'("--ghc-options=-ferror-spans -fshow-loaded-modules"))Maude
Use --- for comments in Maude.
(add-hook 'maude-mode-hook
(lambda ()
(setq-local comment-start "---")))
(with-eval-after-load 'maude-mode
(add-to-list 'maude-command-options "-no-wrap"))Minizinc
(add-to-list 'auto-mode-alist '("\\.mzn\\'" . minizinc-mode))
(defun minizinc-setup ()
(let ((command (concat "minizinc " (buffer-file-name) " "))
(f (concat (file-name-base (buffer-file-name)) ".dzn")))
(local-set-key (kbd "C-c C-c") 'recompile)
(setq-local compile-command (concat command (if (file-exists-p f) f "")))))
(add-hook 'minizinc-mode-hook 'minizinc-setup)Coq
(add-hook 'coq-mode-hook #'company-coq-mode)Key bindings
Inspired by this StackOverflow post I keep a custom-bindings-map that
holds all my custom bindings. This map can be activated by toggling a
simple minor-mode that does nothing more than activating the map. This
inhibits other major-modes to override these bindings. I keep this at
the end of the init-file to make sure that all functions are actually
defined.
(defvar custom-bindings-map (make-keymap)
"A keymap for custom bindings.")Bindings for define-word
(define-key custom-bindings-map (kbd "C-c D") 'define-word-at-point)Bindings for expand-region
(define-key custom-bindings-map (kbd "C->") 'er/expand-region)
(define-key custom-bindings-map (kbd "C-<") 'er/contract-region)Bindings for multiple-cursors
(define-key custom-bindings-map (kbd "C-c e") 'mc/edit-lines)
(define-key custom-bindings-map (kbd "C-c a") 'mc/mark-all-like-this)
(define-key custom-bindings-map (kbd "C-c n") 'mc/mark-next-like-this)Bindings for Magit
(define-key custom-bindings-map (kbd "C-c m") 'magit-status)Bindings for Counsel
(global-set-key (kbd "C-s") 'swiper-isearch)
(global-set-key (kbd "C-r") 'swiper-isearch-backward)
(global-set-key (kbd "M-x") 'counsel-M-x)
(global-set-key (kbd "C-x C-f") 'counsel-find-file)
(global-set-key (kbd "M-y") 'counsel-yank-pop)
(global-set-key (kbd "C-x b") 'ivy-switch-buffer)Bindings for company-mode
(define-key company-active-map (kbd "C-d") 'company-show-doc-buffer)
(define-key company-active-map (kbd "C-n") 'company-select-next)
(define-key company-active-map (kbd "C-p") 'company-select-previous)
(define-key company-active-map (kbd "<tab>") 'company-complete)Bindings for Projectile
(define-key projectile-mode-map (kbd "C-c p") 'projectile-command-map)Bindings for Cider
(with-eval-after-load 'cider
(define-key cider-repl-mode-map (kbd "C-l") 'cider-repl-clear-buffer))Bindings for Olivetti
(define-key custom-bindings-map (kbd "C-c o") 'olivetti-mode)Bindings for built-ins
(define-key custom-bindings-map (kbd "M-u") 'upcase-dwim)
(define-key custom-bindings-map (kbd "M-c") 'capitalize-dwim)
(define-key custom-bindings-map (kbd "M-l") 'downcase-dwim)
(define-key custom-bindings-map (kbd "M-]") 'other-frame)
(define-key custom-bindings-map (kbd "C-j") 'newline-and-indent)
(define-key custom-bindings-map (kbd "C-c s") 'ispell-word)
(define-key comint-mode-map (kbd "C-l") 'clear-comint)Bindings for functions defined above.
(define-key global-map (kbd "M-p") 'jump-to-previous-like-this)
(define-key global-map (kbd "M-n") 'jump-to-next-like-this)
(define-key custom-bindings-map (kbd "M-,") 'jump-to-previous-like-this)
(define-key custom-bindings-map (kbd "M-.") 'jump-to-next-like-this)
(define-key custom-bindings-map (kbd "C-c .") (cycle-themes))
(define-key custom-bindings-map (kbd "C-x k") 'kill-this-buffer-unless-scratch)
(define-key custom-bindings-map (kbd "C-c C-0") 'global-scale-default)
(define-key custom-bindings-map (kbd "C-c C-=") 'global-scale-up)
(define-key custom-bindings-map (kbd "C-c C-+") 'global-scale-up)
(define-key custom-bindings-map (kbd "C-c C--") 'global-scale-down)
(define-key custom-bindings-map (kbd "C-c j") 'cycle-spacing-delete-newlines)
(define-key custom-bindings-map (kbd "C-c d") 'duplicate-thing)
(define-key custom-bindings-map (kbd "<C-tab>") 'tidy)
(define-key custom-bindings-map (kbd "C-z") 'toggle-vterm)
(dolist (n (number-sequence 1 9))
(global-set-key (kbd (concat "M-" (int-to-string n)))
(lambda () (interactive) (switch-vterm n))))
(define-key custom-bindings-map (kbd "C-c C-q")
'(lambda ()
(interactive)
(focus-mode 1)
(focus-read-only-mode 1)))
(with-eval-after-load 'org
(define-key org-mode-map (kbd "C-'") 'org-sync-pdf))
Lastly we need to activate the map by creating and activating the
minor-mode.
(define-minor-mode custom-bindings-mode
"A mode that activates custom-bindings."
t nil custom-bindings-map)License
My Emacs configurations written in Org mode.
Copyright (c) 2013 - 2020 Lars Tveito
This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>.